Wall Panel Kit | Mercedes Sprinter 144
Wall Panel Kit | Mercedes Sprinter 144
Wall Panel Kit | Mercedes Sprinter 144
Wall Panel Kit | Mercedes Sprinter 144
Wall Panel Kit | Mercedes Sprinter 144
Wall Panel Kit | Mercedes Sprinter 144

Wall Panel Kit | Mercedes Sprinter 144

Regular price $1,681.40
/

Style
Material
Only 0 items in stock!

Cover the factory interior of your Mercedes Sprinter 144 with this beautiful wall panel kit. With plenty of material options, you're able to make your van conversion fit your style!

Please see FAQ regarding window cutouts to see available options.  If a specific cutout is needed, enter this information in the notes section at checkout.

Features

  • Panels are cut to size and pre-drilled for easy mounting onto factory holes in your vehicle
  • Headliner-compatible models feature notches in paneling to match factory headliner insert notches for seamless compatibility. Please email us for this request
  • If keeping factory foam headliner blocks, your blocks (or wall panels) will need to be trimmed for a flush fit
  • Holes are added at the center of the panels to prevent vibration that do not coincide with factory holes. This will require drilling and rivet-nuts for proper fitment
  • Not all vans come off the factory line identical. Expect a handful of rivet nuts to be a few millimeters off-course. These need to be widened out with the drill bit or burring bit for the screws to align properly
  • Factory Window cutouts are cutouts wider than opening, where no spacers are required
  • Driver forward window is large factory window behind driver seat
  • Upholstered paneling features acoustic + thermal insulating landau foam with low water absorption below marathon tweed
  • Apply with rivet nuts directly to factory holes or into furring strips.
  • All 1/4'-20 stainless steel machine screws + washers with zinc coated steep rivet nuts with option of black oxide hardware.

Material

  • Unfinished Maple
  • Prefinished Maple
  • Opti-Grey
  • White
  • Black

Please refer to our materials page here to see images and details of each option: Materials

Specs

Weight: Approx. 60-85 lbs
Thickness of Panels: 0.20"-0.26" depending on material choice
Full Width x Full Height: 20" - 48" x 55"-70"

Want to see more? Check out our Spec sheet

Compatibility

This product is compatible with the NCV3 and VS30 models.

What's Included

  • Driver Side Upper Panels
  • Driver Side Wheel Well Panels
  • Driver Side Back Door Panels
  • Passenger Side Upper Panels
  • Passenger Side Wheel Well Panels
  • Slider Door Panels
  • Rear Door Panels
  • Installation Guide
  • Rivet Nuts and Machine Screws
  • Proper Sized Drill Bit

DIY Installation

Installation Difficulty: Medium | 2 people
Installation Time: 3-4 Hours
Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits

    FAQS

    • Can you do window cutouts on this kit?

    There are three types of window cutouts for wall panel kits:

    Full sized window cutouts: If the cutout is for a full sized window, this is relatively simple as we will just have the cutout hug the factory shape at the edge of the window (still flush, so there are no gaps). This is free of charge.

    Vanspeed Capsule cutouts: If the cutout is for a capsules, we can cut your wall panels for perfect compatibility with our capsule trim rings.

    Smaller window cutouts: If the cutout is for a smaller CRL style window (usually 14" x 33" or less), we STRONGLY recommend ordering the panels first and using them as a cutting template. The cutout is free of charge, but the trim rings are not. Trim rings are typically $200 - $400 per set depending on window size and made from joined layers of baltic birch. We will have to collaborate a bit on these orders as I need the approximate window location and precise window measurements prior to making the rings or cutout.

    • How do some of the Mercedes Sprinter wall panel kits vary?

    Mercedes Sprinters interior designs changed in 2018 with two key features that changes wall paneling:

    1. Newer models began featuring factory holes on Upper Wall Panels. While the holes are still pre-drilled on the wall panels, they do not have correlating factory holes and the wall paneling will need to serve as a drilling template for rivet-nut installation. 

    2. Newer models have redesigned rear doors that use exterior hinges as opposed to older models that require interior hinges. The wheel well panels in older models have a cutout specifically designed to house the retracting rear door catch. Additionally, lower back door panels have a different shape for older model sprinters.

    • How can I order a material that isn't listed?

    Send us a message with your request as we can offer this kit in more options.

    ASK A QUESTION

    For those who choose to need less

    We are a team of long-time nomads who bring together the artisans and small businesses committed to making your dream of a life on the road a reality.

    Discover

    Fast-track your camper build

    We've gathered the best conversion kits and DIY resources on the market to help you get on the road faster

    Conversion kits & more

    Essentials for your life on the road

    We did the research for you: shop our carefully curated selection of home goods and outdoor gear for a nomadic life

    Gear for the road

    DIY camper conversions

    Custom designs you can assemble yourself

    Why we care

    We choose to believe that if you're considering living and traveling on the road, you care about the natural habitat you'll be calling home more often. We do, too.

    What we're doing

    The need to need less

    We're on a mission to inspire people to downsize their lives to live better. Our catalog is curated by and for the nomadic community.

    Learn more

    The Journal

    Roadside tips, inspiring stories, roadtrip recommendations, gear reviews, vanlife hacks from our community — and much more.

    Discover now

    Recently viewed