Modular Refrigerator Cabinet

FREE US SHIPPING (LOWER 48 ONLY) • CURRENT LEAD TIME: 5-10 DAYS

This elegant and modluar refrigerator cabinet is a beautiful addition to your van conversion that may be placed on the driver or passenger side. This galley ships pre-assembled and ready to stain or install.

Features

- Cabinet Constructed in material of choice with a beautiful unfinished butcher block.
- Refrigerator of choice + soft close pullout drawer-Push Button Latches are included unless otherwise specified
-Bamboo is oiled unless otherwise specified- Ventillation is pre-cut

Specs

Standard Size:

Cabinet: 21.5" Wide x 20"-24" Deep x 32" Tall

Weight: ~30lbs with no appliances

Installation

Our Galleys are designed to fit your walls with screws or with Rivet Nuts.

Installation Difficulty: easy | 2 peopleInstallation Time: 30 minutesTools Needed: Power Drill, Rivet Nut Tool

Materials

- Natural Alder (Darker material Excellent for darker and richer stains)
- Natural Maple (lighter Material Excellent for lighter stains)
- Prefinished Maple (Already finished for you, no need to stain)- Natural Bamboo and Amber bamboo are 3-ply sheets. - Sugar palm is a unique 3-ply material with a bamboo core.  

NOTE: If you have your own appliances and want custom cutouts, the appliance will need to be sent to our shop. Shipping costs will apply. 

FAQs

• How do I install the galley?

Mounting to the wall: Our galleys are designed to mount to the wall of the vehicle. You can measure and mark a section of solid wall truss/beam behind the cabinet to approximate before shooting a screw or rivet nut into the wall. We recommend a minimum of three rivet nuts or 5 self-tapping screws to hold the galley in place.If you install a refrigerator it is required to cut inlet and outlet ventilation holes for the unit to cool down with posing a fire risk. Refer to your refrigerator unit manual to learn more on air flow direction and ventilation requirements. 

Sealing the butcher block is commonly done using mineral oil, butcher block oil, or food-grade finish. This butcher block arrives unfinished, so make sure to seal it before use. 

• How do I know if the galley will fit my vehicle?

These galleys are designed to take up the space right behind the driver seat in most vehicles. This unit may also be placed elsewhere in the vehicle.For Promaster Models: The galleys are designed to have an angled cutout in the back of the cabinet to clear the dropped floor and allow the unit to sit flush against the wall. The Promaster models also have a structural pillar in the cargo section of the vehicle that will prevent the galley from being flush with the wall if mounting to the pillar. Because of this, we recommend mounting galleys to the left or right of the structural pillars. 

• How do I apply, paint, stain, or sealer?

If you plan on painting:

• lightly scuff the entire surface of the cabinet that you plan on coating with 120-180 grit sandpaper.
• Apply 2-3 coats of primer prior to applying your main coat.
• Always apply a finish when you're happy with the paint to get a long lasting appearance.

If you plan on staining:

• Sand the surface on all faces with sandpaper traveling with the grain of the wood.
• Apply stain very cautiously to a section of the cabinet that will not be visible to gage the volume and pressure you need to achieve the look you want.
• Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
• Please note that overlapping surfaces may make the stain darker on the overlapped areas.
• Always apply a finish when you're happy with the stain to get a long lasting appearance.

For Butcher Blocks and Slabs

• For most units, there are phillips head screws holding the butcher block to the cabinet base that will need to be removed.
• If staining, sand the butcher block thoroughly with 120-180 grit sandpaper. 
  • Apply a sample on the underside of the butcher block to find a volume and pressure that achieves the color you'd like.
  • Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
  • Please note that overlapping surfaces may make the stain darker on the overlapped areas.
  • Always apply a food-grade finish when you're happy with the stain to get a long lasting appearance.
• If sealing with oil or wax, make sure the oil or wax is food grade and apply evenly with a soft rag or sponge. 
  • Allow to dry and re-coat one or two more times.

• I want a different refrigerator, stove, faucet, or sink than you offer, how can I make it fit?

If you already own these units, simply add the model numbers and placement to your order notes, we'll make it fit for you.

If you do not already own the appliances, we can order them to be test-fitted and shipped with your unit from our facility.

The pillar sticks out and I won't be able to mount my unit to the wall. Help!

No need to worry. We include a spacer that is designed for your vehicle to fill the gap between galley and wall. A secondary strip of matching butcher block is also included for you to trim and cover this gap once you settle on placement.